uPCI-200Li : Two Port uPCI-RS232/RS422/RS485
pci-200li
Larger picture

1+   = £65.00 each
5+   = £61.75 each
10+ = P.O.A.

 

  • Universal PCI 3.3 / 5.0V
  • I/O controller: 2x 16C550C or compatible, each with 16 bytes Tx/Rx FIFO
  • Connector type: Male DB9 x 2
  • Serial interface: RS232, RS422 / 485
  • No. of ports: 2 x DB9
  • Signals:
    - RS232: Tx, Rx, CTS/RTS, DTR, DSR, DCD, GND
    - RS422: TxD+/-, RxD+/-, RTS+/-, CTS+/-, GND
    - RS485: Data+/-, GND
  • RS485 data control: ART (Automatic Receive Transmit Control)
  • Built-in termination resistor:
    - RS422: 120 Ohm
    - RS485: 120 Ohm, jumper enable / disable
  • Speed: up to 921.6Kbps
  • Max. no. of ports: 8 (4 boards)
  • Commmunications Configuration
    - Parity: None, even, odd, space, mark
    - Data bits: 5, 6, 7, 8
    - Stop bits: 1, 1.5, 2
  • IRQ: Assigned by System

 

  • I/O address: Assigned by System
  • Available modes:
    - RS232 full duplex
    - RS422 full duplex
    - RS485 4 wire , full duplex
    - RS485 2 wire, half duplex, with echo
    - RS485 2 wire, half duplex, without echo
  • Power requirement: 430mA max.(+5V)
  • Operation temp.: 0C - 55C
  • Dimension: 120mm x 100mm
  • Operating Systems supported
    - WIN95, WIN98, ME : VScom high performance serial driver
    - WIN NT 4.0 : VScom high performance serial driver control panel applet
    - WIN 2000, XP : VScom high performance serial driver
    - DOS : virtual address driver and compatibility tools real DOS Com port emulation
    - OS/2 : third party serial driver SIO.SYS available
    - Linux : VScom high performance real tty driver
    - div.UNIX : configuration instructions

The uPCI-200Li is designed for RS232, RS422/485 industrial communication. It supports 2 independent RS232,RS422 or RS485 ports .Each port can be configured separately.

Available modes :
- RS232, RS422 full duplex
- RS485 full duplex (4 wire)
- RS485 half duplex (2 wire) with and without echo.

In RS485 modes applications enable transmission by simply sending data. This is done by ART (Automatic Receive Transmit Control) intelligence. The Transmitter is disabled exactly with the end of the last character sent. No modification is necessary in programs. In addition, hardware flow control and built-in termination resistors guarantee data integrity. All of these features make uPCI-200Li suitable for harsh industrial applications.

Applications
1. Multi-port data acquisition
2. Industrial control
3. Factory automation
4. Embedded industrial machines
5. Remote serial device control
6. SCADA

uPCI-200Li-SI : 2 Port Isolated uPCI-RS232/RS422/RS485
pci-200li-si
Larger picture

1+   = £90.00 each
5+   = £85.50 each
10+ = P.O.A.

 

  • Universal PCI 3.3 / 5.0V
  • I/O controller: 2x 16C550C or compatible, each with 16 bytes Tx/Rx FIFO
  • Connector type: Male DB9 x 2
  • Serial interface: RS232, RS422 / 485
  • No. of ports: 2
  • Signals:
    - RS232: Tx, Rx, CTS, RTS also with optical isolation and surge protection
    - RS422: TxD+/-, RxD+/-, RTS+/-, CTS+/-, GND
    - RS485: Data+/-, GND
  • RS485 data control: ART (Automatic Receive Transmit Control)
  • Built-in termination resistor:
    - RS422: 120 Ohm
    - RS485: 120 Ohm, jumper enable / disable
  • Speed: up to 921.6Kbps
  • Max. no. of ports: 8 (4 boards)
  • Commmunications Configuration
    - Parity: None, even, odd, space, mark
    - Data bits: 5, 6, 7, 8
    - Stop bits: 1, 1.5, 2
  • IRQ: Assigned by System

 

  • I/O address: Assigned by System
  • Available modes:
    - RS232 full duplex
    - RS422 full duplex
    - RS485 4 wire , full duplex
    - RS485 2 wire, half duplex, with echo
    - RS485 2 wire, half duplex, without echo
  • Power requirement: 430mA max.(+5V)
  • Operation temp.: 0C - 55C
  • Dimension: 120mm x 100mm
  • Operating Systems supported
    - WIN95, WIN98, ME : VScom high performance serial driver
    - WIN NT 4.0 : VScom high performance serial driver control panel applet
    - WIN 2000, XP : VScom high performance serial driver
    - DOS : virtual address driver and compatibility tools real DOS Com port emulation
    - OS/2 : third party serial driver SIO.SYS available
    - Linux : VScom high performance real tty driver
    - div.UNIX : configuration instructions

The uPCI-200Li-SI is designed for RS232, RS422/485 industrial communication. It supports 2 independent RS232,RS422 or RS485 ports .Each port can be configured separately.

Available modes :
- RS232, RS422 full duplex
- RS485 full duplex (4 wire)
- RS485 half duplex (2 wire) with and without echo

In RS485 modes applications enable transmission by simply sending data. This is done by ART (Automatic Receive Transmit Control) intelligence. The Transmitter is disabled exactly with the end of the last character sent. No modification is necessary in programs. In addition, hardware flow control and built-in termination resistors guarantee data integrity.

Optical isolation and surge protection ara also availale for RS232 signals to deliver high reliability. All of these features make uPCI-200Li-SI suitable for harsh industrial applications. Optical isolated RS232 presents uPCI-200Li-SI as a choice for medical environment.

Applications
1. SCADA
2. Multi-port data acquisition
3. Industrial control
4. Factory automation
5. Embedded industrial machine
6. Remote serial device control

uPCI-400Li : Four Port uPCI- RS232/RS422/RS485
upci-400i
Larger picture

1+   = £120.00 each
5+   = £114.00 each
10+ = P.O.A.

 

  • Universal PCI 3.3 / 5.0V
  • I/O controller: 4 x 16C550C or compatible, each with 16 bytes Tx/Rx FIFO
  • Connector type: Male DB37 - 4 x Male DB9 cable supplied
  • Serial interface: RS232, RS422 / 485
  • No. of ports: 4
  • Signals:
    - RS232: Tx, Rx, CTS/RTS, DTR, DSR, DCD, GND
    - RS422: TxD+/-, RxD+/-, RTS+/-, CTS+/-, GND
    - RS485: Data+/-, GND
  • RS485 data control: ART (Automatic Receive Transmit Control)
  • Built-in termination resistor:
    - RS422: 120 Ohm
    - RS485: 120 Ohm, jumper enable / disable
  • Speed: up to 921.6Kbps
  • Max. no. of ports: 8 (4 boards)
  • Commmunications Configuration
    - Parity: None, even, odd, space, mark
    - Data bits: 5, 6, 7, 8
    - Stop bits: 1, 1.5, 2
  • IRQ: Assigned by System

 

  • I/O address: Assigned by System
  • Available modes:
    - RS232 full duplex
    - RS422 full duplex
    - RS485 4 wire , full duplex
    - RS485 2 wire, half duplex, with echo
    - RS485 2 wire, half duplex, without echo
  • Power requirement: 430mA max.(+5V)
  • Operation temp.: 0C - 55C
  • Dimension: 135mm x 100mm
  • Operating Systems supported
    - WIN95, WIN98, ME : VScom high performance serial driver
    - WIN NT 4.0 : VScom high performance serial driver control panel applet
    - WIN 2000, XP : VScom high performance serial driver
    - DOS : virtual address driver and compatibility tools real DOS Com port emulation
    - OS/2 : third party serial driver SIO.SYS available
    - Linux : VScom high performance real tty driver
    - div.UNIX : configuration instructions

The uPCI-400Li is designed for RS232, RS422/485 industrial communication. It supports 4 independent RS232,RS422 or RS485 ports .Each port can be configured separately.

Available modes :
- RS232, RS422 full duplex
- RS485 full duplex (4 wire)
- RS485 half duplex (2 wire) with and without echo.

In RS485 modes applications enable transmission by simply sending data. This is done by ART (Automatic Receive Transmit Control) intelligence. The Transmitter is disabled exactly with the end of the last character sent. No modification is necessary in programs. In addition, hardware flow control and built-in termination resistors guarantee data integrity. All of these features make uPCI-400Li suitable for harsh industrial applications.

Applications
1. Multi-port data acquisition
2. Industrial control
3. Factory automation
4. Embedded industrial machines
5. Remote serial device control
6. SCADA