USB-2COM-PL : Dual Port with detachable USB cable
2com-pl
Larger picture

*** SPECIAL PROMOTIONAL  PRICE ***

 

  • Attractive translucent plastic design
  • Serial port speed of up to 230K bps per port
  • Adds two RS-232 serial ports by connecting to USB
  • Installed as standard Windows COM ports
  • FIFO: 128 byte transmit buffer 384 byte receive buffer
  • Works with USB 1.1 & 2.0 host ports
  • Two DB9 male connectors
  • Serial Communication Parameters
     -Parity: None, Even, Odd
     -Data bits: 7, 8
     -Flow control: RTS/CTS , DSR/DTR, X-ON/  X-OFF, None
  • Detachable 25cm USB cable

 

  • RxD, TxD LEDs for monitoring port status & easy diagnostics
  • COM Port Number can be changed to COM1 to COM4 to support HyperTerminal, or any other COM port number required
  • Industry Standard FTDI chip set & drivers for maximum compatibility
  • Supports Windows XP, 2003, 2000, ME, 98, Linux, MAC-OS8,9,X
  • Full RS-232 modem control signals
  •  RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND
  •  Powered by USB port. No external power adapter required.

 DOWNLOAD USER MANUAL

USB-2COM-PL can plug directly into a unused USB port using it's inbuilt USB "A" plug where space permits. A short 25cm detachable USB extension cable allows the USB-2COM-PL to be used where connector spacing does not allow the USB-2COM-PL to be inserted directly. 

USB-2COM-PL features a full set of RS-232 modem data and control signals (TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, and GND) on it's PC compatible DB9 male connectors and has an internal 128 byte transmit buffer FIFO and a 384 byte receive buffer FIFO on each of its 2 RS232 Ports. Each port supports RS232 data transfer rates of up to 230K bps. No external power supply is required as USB-2COM-PL takes it's power from the USB bus.

USB-2COM-PL comes complete with drivers for Microsoft Windows '98, Windows ME, Windows 2000, and Windows XP. The Windows XP drivers are fully WHQL certified. Also included are drivers for Apple OS8, OS9 and OSX. Linux kernel 2.4.20 or greater includes also USB drivers for this product.

USB-COM-PL : USB-RS232 with detachable USB cable
us232xc
Larger picture

***  Special Promotional Price  ***

 

 

  • Attractive translucent plastic design
  • Serial port speed of up to 230K bps
  • Adds one RS-232 serial port by connecting to USB port
  • Installed as standard Windows COM port
  • FIFO: 128 byte transmit buffer 384 byte receive buffer
  • Works with USB 1.1 & 2.0 host port
  • One DB9 male connector
  • Serial Communication Parameters
     -Parity: None, Even, Odd
     -Data bits: 7, 8
     -Flow control: RTS/CTS , DSR/DTR, X-ON/  X-OFF, None

 

  • Detachable 10cm USB cable
  • RxD, TxD LEDs for monitoring port status & easy diagnostics
  • COM Port Number can be changed to COM1 to COM4 to support HyperTerminal, or any other COM port number required
  • Industry Standard FTDI chip set & drivers for maximum compatibility
  • Supports Windows XP, 2003, 2000, ME, 98, Linux, MAC-OS8,9,X
  • Full RS-232 modem control signals
  •  RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND
  •  Powered by USB port. No external power adapter required.

 DOWNLOAD USER MANUAL

USB-COM-PL can plug directly into a unused USB port using it's inbuilt USB "A" plug where space permits. A short 10cm detachable USB extension cable allows the USB-COM-PL to be used where connector spacing does not allow the USB-COM-PL to be inserted directly. 

USB-COM-PL features a full set of RS-232 modem data and control signals (TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, and GND) on it's PC compatible DB9 male connector and has an internal 128 byte transmit buffer FIFO and a 384 byte receive buffer FIFO. It supports RS232 data transfer rates of up to 230K bps. No external power supply is required as USB-COM-PL takes it's power from the USB bus.

USB-COM-PL comes complete with drivers for Microsoft Windows '98, Windows ME, Windows 2000, and Windows XP. The Windows XP drivers are fully WHQL certified. Also included are drivers for Apple OS8, OS9 and OSX. Linux kernel 2.4.20 or greater includes also USB drivers for this product

PS40M10 : Swordfish Hand-Held Instrument
swordfish
Larger picture

 

*** Special Promotional Price  ***


Extra 10% Discount to bona-fide students
and educational establishments.

 

  • Combined Oscilloscope, Data Logger, Spectrum Analyzer, Voltage and Frequency Meter functions
  • 10 Bit ADC Resolution
  • 1.5k Byte Waveform buffer
  • Oscilloscope Mode - 1G S/s sampling rate ( repetitive ) 40M S/s native
  • DataLogger Mode - up to 5k S/s 10-bit data streaming simultaneously on both channels
  • Maximum input voltage +/- 50V
  • AC / DC Coupling
  • Edge, min/max,  pulse width and delayed trigger modes
  • Analog Bandwidth 5MHz
  • Precision spring loaded probe tip or BNC connection

 

  • "Breathing" LED display to indicate mode
  • "Stop capture" Button on top of Instrument
  • Hardware upgradeable over USB
  • Self Powered USB Interface ( 250mA )
  • EasyScope II  ( Windows ) software included
  • EasyLogger ( Windows ) software included
  • Interface DLL's and code samples for 3rd party developers included
  • Instrument carrying bag included
  • Attractive enclosure with soft touch paint finish
  • Dimensions W: 34mm x H: 24mm x D: 240mm
  • Weight : 160g including cable

GETTING STARTED GUIDE      PRODUCT BROCHURE      SOFTWARE DOWNLOADS 
EASYSCOPE II USERS MANUAL     EASYLOGGER USERS MANUAL    USB INSTRUMENTS WEB

The PS40M10 Swordfish is a unique hand held device that combines the functions of Oscilloscope, Data Logger, Spectrum Analyser, Volt Meter and Frequency Meter in a single instrument. Swordfish features a user replaceable precision spring loaded probe tip which can be used to probe even small smd components. The probe tip and cover can be removed, revealing a standard phono ( RCA ) socket. A phono to BNC adapter ( supplied ) allows Swordfish to connect to standard oscilloscope probes or BNC cables if required. Powered from USB, Swordfish needs no external power supply. Swordfish features a 10-bit ADC with a true sampling rate of up to 40M Samples /sec and sophisticated hardware triggering. The over-sampling feature of the EasyScope II software allows repetitive waveforms to be viewed at an effective resolution of up to 1nS ( == 1G Samples / sec ). Swordfish comes complete with EasyScope II ( oscilloscope ) and EasyLogger ( data logging ) software.
The supplied Windows DLL's allows 3rd party applications to easily interface to Swordfish. Example code in several popular programming languages including LabView are provided. Windows CE and Linux drivers are also available on request for bona-fide 3rd party developers.

DP60 60MHz x1 /x10 Oscilloscope Probes
dp60-probe
Larger picture

These scope probes were originally sold with our DS2200 Oscilloscope and have been superceded by the HP3060 probes which have a slimmer BNC connector more suited to the DS1M12 model.  The DP60 probes come complete with accessories in a plastic pouch, are fully guaranteed, and are being sold off at half the original price to clear our stocks. 

HC-344 USB1.1 PCI Host Card
hc344
Larger picture

 

Based on the Agere ( Lucent ) USS-344 with it's Quadrabus Technology, this card delivers full USB 1.1 bandwidth to each of it's 4 USB Ports as each port is essentially an individual host controller as opposed to a root hub. This is the ideal card for upgrading older PC's which may not have the PCI bandwidth to cope with USB2.0 full speed. Works with Windows 98, 2k, ME and XP as well as OS-8.6 / 9.x As the USS-344 device is no longer in production we are selling our remaining stock at a fraction of the original price. Grab one today.